Animal Models for Investigating Osseointegration: An Overview of Implant Research over the Last Three Decades.

Dental implants and bone augmentation are among dentistry's most prevalent surgical treatments; hence, many dental implant surfaces and bone grafts have been researched to improve bone response. Such new materials were radiologically, histologically, and histomorphometrically evaluated on animals before being used on humans. As a result, several studies used animals to evaluate novel implant technologies, biocompatibility, surgical techniques, and osseointegration strategies, as preclinical research on animal models is essential to evaluate bioactive principles (on cells, compounds, and implants) that can act through multiple mechanisms and to predict animal behavior, which is difficult to predict from in vitro studies alone. In this study, we critically reviewed all research on different animal models investigating the osseointegration degree of new implant surfaces, reporting different species used in the osseointegration research over the last 30 years. Moreover, this is the first study to summarize reviews on the main animal models used in the translational research of osseointegration, including the advantages and limitations of each model and determining the ideal location for investigating osseointegration in small and large animal models. Overall, each model has advantages and disadvantages; hence, animal selection should be based on the cost of acquisition, animal care, acceptability to society, availability, tolerance to captivity, and housing convenience. Among small animal models, rabbits are an ideal model for biological observations around implants, and it is worth noting that osseointegration was discovered in the rabbit model and successfully applied to humans.

Heating of metallic orthodontic devices during anti-aging treatment with vacuum and electromagnetic fields: In vitro study.

BACKGROUND: The physical appearance of an individual plays a primary role as it influences the opinion of the viewer. For this reason, orthodontic therapy to improve perceived aesthetics is in high demand among patients. This factor, combined with the increase in the number of non-invasive facial aesthetic treatments, has led to the need to understand potential risk factors in the application of medical devices to the perioral skin in patients with fixed orthodontic appliances. The aim of this study was to evaluate in vitro heating of the orthodontic bracket following electromagnetic fields and negative pressure (V-EMF) used as an anti-aging treatment. METHODS: Two different types of titanium alloy wires, one made of "beta-Titanium" alloy and the other "Ni-Ti" (DW Lingual Systems GmbH-Bad Essen-Germany) were used. The orthodontic wires and brackets mounted on a resin mouth were covered with porcine muscle tissue, then subjected to anti-aging therapy with a Bi-one LifeTouchTherapy medical device (Expo Italia Srl-Florence-Italy) which generates a combination of vacuum and electromagnetic fields (V-EMF) already adopted for antiaging therapy. During administration of the therapy, the orthodontic brackets and porcine tissue were thermally monitored using a Wavetek Materman TMD90 thermal probe (Willtek Communications GmbH-Germany). In total 20 orthodontic mouths were used, 10 with Beta Titanium wires and 10 with Nickel Titanium wires. RESULTS: A temperature increase of about 1°C was recorded in each group. The outcome of the present research shows that the absolute temperatures measured on orthodontic appliances, which, despite having a slightly different curve, both show an increase in temperature of 1.1°C at the end of the session, thus falling well within the safety range of 2°C as specified by the standard CENELEC EN 45502-1. Therefore, V-EMF therapy can be considered safe for the entire dental system and for metal prostheses, which tend to heat up at most as much as biological tissue (+0.9°C/1.1°C vs. 1.1°C/1.1°C). CONCLUSION: In conclusion, anti-aging therapy with V-EMF causes a thermal increase on orthodontic brackets that is not harmful to pulp health.

Gluteal femoral subcutaneous and dermal adipose tissue in female.

BACKGROUND: During the sexual maturation, gluteal femoral adipose tissue is subjected to numerous modifications, not observable in other regions, in particular in women and less in men. Other authors described this region, but they used imaging techniques having lower resolution, than MRI proposed in this study. High resolution imaging techniques might provide important and more detailed information about the anatomy of gluteal femoral region. METHODS: This study has been performed using 7 T-magnetic resonance imaging and ultrastructural analysis in order to provide accurate description of the subcutaneous adipose tissue and dermis of gluteal femoral region. In this study specimens harvested from cadavers and form living patients have been analyzed. RESULTS: The results showed the presence of three layers: superficial, middle, and deep, characterized by different organization of fat lobules. High resolution imaging showed the adipose papilla that originates from dermis and protrude in subcutaneous adipose tissue. Adipose papilla is characterized by a peculiar morphology with a basement, a neck and a head and these elements represent the functional subunits of adipose papilla. Moreover, ultrastructural study evidenced the relationship between adipocytes and sweat glands, regulated by lipid vesicles. CONCLUSIONS: This study provides important information about subcutaneous and dermal fat anatomy of gluteal femoral region, improving the past knowledge, and move toward a better understanding of the cellulite physiopathology.

Ultrasound-guided diagnosis on a parapharyngeal mass.

Masses in the parapharyngeal area are rare and often due to infectious phenomena arising from the oral cavity or pharynx which lead to abscess formation. Less frequently, the lesion can be neoplastic. Tumours of the parapharyngeal space are rare, accounting for less than 1% of all head and neck neoplasms. We report the case of a patient who came to our observation for mandibular pain. Multiparametric diagnostic imaging was done thus showing a parapharyngeal mass. An ultrasound guided biopsy was performed by a transcutaneous route with a high median approach at neck level, to characterize the mass in the right tonsillar region. The histological examination reported the final histological diagnosis of sarcomatoid carcinoma.

Implant Stability and Histomorphometric Analysis Comparing Two Different Implant Macrogeometries Placed in Fresh Sockets: An Experimental Study in Sheep.

PURPOSE: The aim of the present animal study was to examine the impact of two implant designs that promote different insertion torque values on implant stability and evaluate, histomorphometrically, the bone healing for immediate implant placement in fresh sockets. MATERIALS AND METHODS: Twelve female sheep (35.0±5.0kg) and 48 conical Morse-taper dental implants divided into two groups (n = 24 per group): G1 group, where the implants present a design that can provide high insertion torque values; and G2 group, where the implants present a design that can provide low insertion torque values. Both had the same surface treatment, and dimensions (4.0 mm in diameter and 10 mm in length). The first two posterior teeth (both sides) were extracted carefully. Sequentially, there were osteotomies in the mesial socket of each molar tooth. The final implant position was 2 mm below the buccal bone crest level. On the right side, implants of the G1 were placed anteriorly, followed by implants of the G2; and, on the left side, it was the reverse. A digital torquemeter was used to measure the maximum final insertion torque value (f-IT). The initial implant stability quotient (ISQ) was measured immediately after the implant insertion (T0) and immediately after the euthanasia and removing the mandibles with the implants. The animals were euthanized (n=6 animals/ time) at 21 days (T1) and 35 days (T2). The t-test was used to compare statistical differences for each intragroup parameter analyzed. Pearson's correlation was used to analyze possible correlations: f-IT and BIC%, f-IT and ISQ, and ISQ and %BIC. RESULTS: Regarding the insertion torque, the G1 presented higher values than the G2, with a statistically significant difference (p<0.0001). The ISQ mean values were higher in the B-L direction than those obtained for M-D for both groups. %BIC measurements showed higher values in samples from G2 than G1 at both times and in both directions. New bone, medullary spaces, and collagen matrix had statistical differences between the groups at each evaluation time. CONCLUSION: Using implants with a modified macrogeometry plays a significant role in implant stability and the healing process of bone tissue around the implant. It is important for clinicians to carefully consider implant macrogeometry when planning dental implant surgery to achieve optimal implant stability and successful osseointegration, mainly in cases of immediate implant placement.

Does the index in Morse taper connection affect the abutment stability? An in vitro experimental study.

The present study compared three different implant and abutment sets of type Morse taper (MT) connection, with- and without-index, were analyzed regarding their mechanical behavior without and with cyclic load application simulating the masticatory function. Ninety implant and abutment (IA) sets were used in the present study, divided into three groups (n = 30 samples per group): Group A, Ideale solid straight abutment (one piece) without index; Group B, Ideale abutment with an angle of 30-degree (two pieces) without index; Group C, Ideale abutment with an angle of 30-degree (two pieces) with index. The abutment stability quotient (ASQ) values, detorque value and rotation angle were measured before and after the cycling load. Twenty IA sets of each group were submitted to mechanical load at 360,000 cycles. The ASQ without load were 64.7 ± 2.49 for the group A, 60.2 ± 2.64 for the group B, 54.4 ± 3.27 for the group C; With load were 66.1 ± 5.20 for the group A, 58.5 ± 6.14 for the group B, 58.9 ± 2.99 for the group C. Detorque values were lower in groups B and C compared to group A (p < 0.05). In conclusion, the presence of the index did not influence the stability values. However, solid straight abutments (group A) showed higher values of stability compared to groups of angled abutments (groups B and C).

An animal study on the effectiveness of platelet-rich plasma as a direct pulp capping agent.

Direct pulp capping (DPC) is a conservative approach for preserving tooth vitality without requiring more invasive procedures by enhancing pulp healing and mineralized tissue barrier formation. We investigated the effectiveness of Platelet Rich Plasma (PRP) vs. Mineral Trioxide Aggregate (MTA) as a DPC agent. Forty-two teeth from three mongrel dogs were divided into two equal groups. After three months, the animals were sacrificed to evaluate teeth radiographically using cone-beam computerized tomography, histopathologically, and real-time PCR for dentin sialophosphoprotein (DSPP), matrix extracellular phosphoglycoprotein (MEPE), and nestin (NES) mRNA expression. Radiographically, hard tissue formation was evident in both groups without significant differences (p = 0.440). Histopathologic findings confirmed the dentin bridge formation in both groups; however, such mineralized tissues were homogenous without cellular inclusions in the PRP group, while was osteodentin type in the MTA group. There was no significant difference in dentin bridge thickness between the PRP-capped and MTA-capped teeth (p = 0.732). The PRP group had significantly higher DSPP, MEPE, and NES mRNA gene expression than the MTA group (p < 0.05). In conclusion, PRP enables mineralized tissue formation following DPC similar to MTA, and could generate better cellular dentinogenic responses and restore dentin with homogenous architecture than MTA, making PRP a promising alternative DPC agent.

Fibroblasts and osteoblasts behavior after contact with different titanium surfaces used as implant abutment: An in vitro experimental study.

Background: The goal of this in vitro study was to compare three different surfaces: two types of implant surfaces commercially available ([a] smooth/machined and [b] acid-treated surface) versus (c) anodized surface. Discs were manufactured with commercially pure titanium (CP) grade IV, which were subsequently analyzed by scanning microscopy and fibroblastic and osteoblastic cell cultures. Methods: Ninety-nine discs (5 × 2 mm) were manufactured in titanium grade IV and received different surface treatments: (i) Mach group: machined; (ii) AA group: double acid etch; and (iii) AN group: anodizing treatment. Three discs from each group were analyzed by Scanning Electron Microscopy (SEM) to obtain surface topography images and qualitatively analyzed by EDS. Balb/c 3T3 fibroblasts and pre-osteoblastic cells (MC3T3-E1 lineage) were used to investigate each group's biological response (n = 10/cellular type). The data were compared statistically using the ANOVA one-way test, considered as a statistically significant difference p < 0.05. Results: The AA group had numerous micropores with diameters between 5 and 10 µm, while nanopores between 1 and 5 nm were measured in the AN group. The EDX spectrum showed a high titanium concentration in all the analyzed samples. The contact angle and wetting tension were higher in the AA, whereas similar results were observed for the other groups. A lower result was observed for base width in the AA, which was higher in the other two groups. The AN showed the best values in the fibroblast cells, followed by Mach and AA; whereas, in the culture of the MC3T3 cells, the result was precisely the opposite (AA > Mach > AN). There was similar behavior for cell adhesion for the test groups (Mach and AN), with greater adhesion of Balb/c 3T3 fibroblasts compared to MC3T3 cells; in the AA group, there was greater adherence for MC3T3 cells compared to Balb/c 3T3 fibroblasts. Conclusions: The findings suggest that different surface characteristics can produce different biological responses, possibly cell-line dependent. These findings have important implications for the design of implantable medical devices, where the surface characteristics can significantly impact its biocompatibility.

A new easy technique to identify the correct artificial hair implantation site: A case series and preliminary results.

BACKGROUND: The implantation of artificial hair is a successful standardized procedure to restore bald areas or scarred alopecic surfaces of the scalp in both sexes. MATERIALS AND METHODS: Sebometric measurements were taken, pre, 1, 3, and 6 months postimplant in two symmetric frontotemporal areas of the scalp of seven volunteers to be implanted with 50 units of artificial hair. The artificial hair used in this study are Biofibre 4.0 produced by Medicap srl, Italy. RESULTS: The dermaroller assisted procedure was performed only on one side, and the plain random implant contralaterally for comparison. A marked downregulation of the sebum concentration was observed in the dermaroller treated area 1, 3, and 6 months later in respect to the control side. CONCLUSION: The dermaroller assisted procedure is safe and effective in reducing the foreign body reaction by the sebaceous glands and the vascular axis injured by the implanting needle; a longer standing success of the implanted hair can thus be achieved reducing the burden of inflammatory reaction.

New Insights into the Enhancement of Adventitious Root Formation Using N,N'-Bis(2,3-methylenedioxyphenyl)urea.

Adventitious rooting is a process of postembryonic organogenesis strongly affected by endogenous and exogenous factors. Although adventitious rooting has been exploited in vegetative propagation programs for many plant species, it is a bottleneck for vegetative multiplication of difficult-to-root species, such as many woody species. The purpose of this research was to understand how N,N'-bis-(2,3-methylenedioxyphenyl)urea could exert its already reported adventitious rooting adjuvant activity, starting from the widely accepted knowledge that adventitious rooting is a hormonally tuned progressive process. Here, by using specific in vitro bioassays, histological analyses, molecular docking simulations and in vitro enzymatic bioassays, we have demonstrated that this urea derivative does not interfere with polar auxin transport; it inhibits cytokinin oxidase/dehydrogenase (CKX); and, possibly, it interacts with the apoplastic portion of the auxin receptor ABP1. As a consequence of this dual binding capacity, the lifespan of endogenous cytokinins could be locally increased and, at the same time, auxin signaling could be favored. This combination of effects could lead to a cell fate transition, which, in turn, could result in increased adventitious rooting.

Correlation between use of different type protective facemasks and the oral ecosystem.

BACKGROUND: Spread worldwide through droplets, the Virus Sars-Cov-19 has caused a global health emergency alarm. In order to limit its spread, the use of masks has become part of the daily life of the entire population, however, little is known about its constant use and the changes generated in the oral cavity. This work aims to investigate correlations between the continuous use of masks covering the nose and mouth for 3 h and changes in the ecological factors of the oral cavity. METHODS: 34 volunteers were divided into 2 groups: wear only the filtering facepiece code 2 (FFP2) mask (Group A) and wear the FFP2 mask covered by a surgical mask (Group B). Measurement of Volatile Organic Compounds (VOCs), saliva rehydration and consistency test, collection of basal saliva and saliva stimulated with paraffin gum and mucosal swab were collected and analyzed at two times: before using the mask(s) (T0) and 3 h after continuous use of the mask(s) (T1). RESULTS: The results indicated a significant difference between the groups, in which the basal saliva volume and pH and the peaks of VOCs increased for group B between T0 and T1. The rehydration time decreased and the volume and pH of the stimulated saliva increased, but with no significant difference between the groups. Furthermore, group B showed a significant decrease in Candida albicans Colony Forming Units (CFUs) and Total Bacterial Count (TBC) between T0 and T1. CONCLUSION: It is concluded that the prolonged use of the FFP2 mask covered by a surgical mask can generate oral alterations in the user.

Application of Graphene Oxide in Oral Surgery: A Systematic Review.

The current review aims to provide an overview of the most recent research in the last 10 years on the potentials of graphene in the dental surgery field, focusing on the potential of graphene oxide (GO) applied to implant surfaces and prosthetic abutment surfaces, as well as to the membranes and scaffolds used in Guided Bone Regeneration (GBR) procedures. "Graphene oxide" and "dental surgery" and "dentistry" were the search terms utilized on the databases Scopus, Web of Science, and Pubmed, with the Boolean operator "AND" and "OR". Reviewers worked in pairs to select studies based on specific inclusion and exclusion criteria. They included animal studies, clinical studies, or case reports, and in vitro and in vivo studies. However, they excluded systematic reviews, narrative reviews, and meta-analyses. Results: Of these 293 studies, 19 publications were included in this review. The field of graphene-based engineered nanomaterials in dentistry is expanding. Aside from its superior mechanical properties, electrical conductivity, and thermal stability, graphene and its derivatives may be functionalized with a variety of bioactive compounds, allowing them to be introduced into and improved upon various scaffolds used in regenerative dentistry. This review presents state-of-the-art graphene-based dental surgery applications. Even if further studies and investigations are still needed, the GO coating could improve clinical results in the examined dental surgery fields. Better osseointegration, as well as increased antibacterial and cytocompatible qualities, can benefit GO-coated implant surgery. On bacterially contaminated implant abutment surfaces, the CO coating may provide the optimum prospects for soft tissue sealing to occur. GBR proves to be a safe and stable material, improving both bone regeneration when using GO-enhanced graft materials as well as biocompatibility and mechanical properties of GO-incorporated membranes.

Effects of Terpenes on the Osteoarthritis Cytokine Profile by Modulation of IL-6: Double Face versus Dark Knight?

BACKGROUND: Hemp seed oil and terpenes are emerging as a dietary supplement and complementary therapy for patients suffering from knee osteoarthritis (KOA). However, the mechanisms and effects induced by these molecules on inflammatory cytokines are not yet fully understood. The aim of this study was to evaluate the changes in the cytokine IL-1ß, IL-1α, IL-2, IL-6, and TNF-α levels from two oral hemp seed oil-based dietary supplements, of which only one included the addition of terpenes, in a population of KOA patients. METHODS: Sera from venous blood samples were collected from thirty-eight patients who were divided into two subgroups. The control group underwent a 45-day treatment with a dietary supplement containing only hemp seed oil, while the treatment group assumed a hemp seed oil and terpene-based dietary supplement for the same number of days. A Bio-Plex Human Cytokine assay was performed by a customized human cytokine five-plex panel for IL-1ß, IL-1α, IL-2, IL-6, and TNF-α. Patients were evaluated before the beginning of the treatment (T0) and soon after it (T1). RESULTS: No measurable levels of IL-2 and TNF-α were found in any of the subjects. Low levels of IL-1ß were found, which were significantly decreased in the treatment group. No change in IL-1α levels was observed, while treated patients had a significant increase in IL-6 levels. CONCLUSIONS: Hemp seed oil and terpene treatment modified the IL-1ß and IL-6 levels, counteracting KOA inflammation in this way. In this study, IL-6 revealed its new and alternative action, since it is traditionally known as a pro-inflammatory factor, but it recently has been found to have anti-inflammatory activity in the muscle-derived form, which is the one it assumes as a myokine when activated by terpenes.

Evaluation of short-term face rejuvenation effects of non-ablative bipolar radiofrequency treatment performed by Med-RF© device.

OBJECTIVE: Skin laxity and wrinkling are common signs of the aging process. This physiological condition of the skin is often accompanied by psychological and social concerns, especially for females, entailing considerable expenses for cosmetics and pharmaceuticals to cease or slow down its advancement. The objective of this study was to evaluate the short-term impact of a new non-ablative radiofrequency device available in the skin face cosmetic field. METHODS: A randomized study was run on 62 healthy subjects with normal-age related-grade skin laxity, subdivided into two groups. Group 1 received one treatment with Modula RF device (Wavemed, San Cesareo RM, Italy) over the whole face surface. Group 2 received three monthly treatments. RESULTS: Clinical improvements of the exposed areas were detected by measuring skin parameters, such as total water content, elasticity, and sebum levels at baseline and 1 h after the treatment. Data showed significant effects of Med-RF treatment on skin hydration (p < 0.001), skin elasticity (p < 0.0001), and sebum (p = 0.0009). Moreover, a negative linear correlation was obtained between women's age and hydration. CONCLUSION: In conclusion, the results of this study suggest that radiofrequency significantly improves the subjective and objective judgment of patients and doctors, supported by the positive results obtained on the skin quality parameters evaluated. These results confirm that Med-RF technology represents an important tool to achieve face rejuvenation in the field of non-invasive procedures.

RA.DI.CA. Splint Therapy in the Management of Temporomandibular Joint Displacement without Reduction.

BACKGROUND: The purpose of this study is to report clinical and instrumental changes after RA.DI.CA splint therapy for temporomandibular joint disc displacement without reduction. METHODS: Subjects affected by disc dislocation without reduction were recruited between July 2020 and May 2022 based on inclusion and exclusion criteria and treated with RA.DI.CA. splints over a period of 6 months. Clinical data were collected at each phase of the study (T0, T1, T2). Magnetic resonance imaging and electrognathography data were recorded at the beginning (T0) and at the end (T2) of the study. ANOVA with post-hoc contrasts was performed to assess differences in outcome measures over time. The Wilcoxon test was used to evaluate changes in disc-condyle angle between before- and after-treatment MRI. A two-tailed value of p < 0.05 was regarded as significant. METHODS: Ten patients completed the study. There were statistically significant differences over time for arthralgia, headache, neck pain, and mouth opening. Disc recapture and an improved quality of mandibular movement were recorded in 70% of subjects. The clinical and instrumental improvements are probably due to the orthopedic action of RA.DI.CA splint treatment, which allows for a greater degree of joint mobilization. CONCLUSIONS: The purpose of this therapy is to recover the disc position if possible and achieve an adequate joint functional adaptation that avoids the progression of the structural damage and the recurrence of symptoms.

Evaluation of Behavior of Castable versus Machined Solid Abutments for Morse Tapper Implant Connection: A Clinical Retrospective Study.

Objective: The primary objective of the present retrospective clinical study was to evaluate and compare the clinical performance presented by castable abutments developed for the MT system versus intermediate machined abutments, specifically regarding prosthetic or implant fractures/loss; the secondary objective was to verify the looseness of the abutments and the behavior of the peri-implant soft tissues. Methods: This clinical retrospective study was conducted on patients rehabilitated between 2019 and 2020. Inclusion criteria were patients in good general health, with an implants-supporting single crown; with solid machined abutments (control group) or castable UCLA abutments; with a connection portion (base) machined in cobalt-chrome (test group) over Morse taper DuoCone implants in the posterior mandible area; and at least two years in function. Clinical assessment was carried out by the same professional, considering the following parameters: (A) prosthetic: (i) loosening of the fixation screw, (ii) fracture of the screw and (iii) the number of times the patient had some type of complication after the installation of the prostheses were evaluated; (B) biological: (i) without keratinized mucosa (KM), (ii) 1 mm or less, (iii) between 1 and 2 mm and (iv) greater than 2 mm of KM width; and the presence or absence of mucositis. Furthermore, radiographic evaluation was performed in order to assess the marginal bone loss. These evaluations permitted to compare the groups analyzed and patients enrolled. Data were statistically analyzed, with the level of significance set at α = 0.05. Results: 79 patients with 120 MT implants were evaluated (80 castable UCLA abutments and 40 machined solid abutments). The follow-up was from 2 to 4 years. There was a 100% implant survival rate. Therefore, the control group showed two fractured abutments (5%) and no abutment loosening (95% for prosthetic survival rate), whereas the test group showed no abutment fracture but nine loosening screws (11.3%) (100% for prosthetic survival rate). Keratinized mucosa was considered thin or absent in 19 implants in the control group (47.5%) and 42 in the test group (52.5%). Mucositis was found in 11 implants in the control group (27.5%) and 27 in the test group (33.8%). A positive correlation was observed between the width of keratinized mucosa and mucositis (r = 0.521, p = 0.002). The mean marginal bone loss was 2.3 mm, ranging from 1.1 to 5.8 mm. No correlation was observed when considering marginal bone loss versus the three parameters (implant diameter, implant length and time of the prosthesis in function). Conclusions: The results suggest that UCLA-type abutments are a viable option for rehabilitating implants with Morse taper connections, suggesting lower fracture risk. Further research is necessary to confirm these findings and thoroughly evaluate the clinical performance and long-term outcomes.

New strategy for osseodensification during osteotomy in low-density bone: an in vitro experimental study.

The goal of this in vitro study was to evaluate and propose a new strategy for osseodensification technique using a drill counterclockwise to densification of bone of low density. Synthetic bone blocks of two different low densities (type III and IV) were used for the tests. The conventional drilling group (CD group) used Turbo-drill in a clockwise direction, and the osseodensification group (OD group) applied Turbo-drill in a counterclockwise direction. The applied tests were: (i) measurement of the temperature variation (ΔT) and (ii) measurement of the torque during the osteotomies, comparing the new strategy with the conventional drilling. Both groups were tested without (condition c1) and with (condition c2) irrigation, generating four subgroups: CDc1, CDc2, ODc1, and ODc2. Twenty osteotomies were made for each subgroup with a thermocouple positioned intra-bone (1 mm distant from the osteotomy) to measure the temperature produced. Other 20 samples/group were used to measure the torque value during each osteotomy in both synthetic bone density blocks. The mean of the ΔT during the osteotomies in type III bone was: 6.8 ± 1.26 °C for the CDc1 group, 9.5 ± 1.84 °C for the ODc1, 1.5 ± 1.35 °C for the CDc2, and 4.5 ± 1.43 °C for ODc2. Whereas, in the type IV bone, the ΔT was: 5.2 ± 1.30 °C for the CDc1 group, 7.0 ± 1.99 °C for the ODc1, 0.9 ± 1.05 °C for the CDc2, and 2.7 ± 1.30 °C for ODc2. The maximum torque during the osteotomies was: 8.8 ± 0.97 Ncm for CD samples and 11.6 ± 1.08 Ncm for OD samples in the type III bone; and 5.9 ± 0.99 Ncm for CD samples and 9.6 ± 1.29 Ncm for OD samples in the type IV bone. Statistical differences between the groups were detected in tests and conditions analyzed (p < 0.05). Using the drill counterclockwise for osseodensification in low-density bone generated a significantly greater torque of a drill than in CD and temperature variation during osteotomies. However, the temperature range displayed by the OD group was below critical levels that can cause damage to bone tissue.

Cannabidiol for Oral Health: A New Promising Therapeutical Tool in Dentistry.

The medical use of cannabis has a very long history. Although many substances called cannabinoids are present in cannabis, Δ9tetrahydrocannabinol (Δ9-THC), cannabidiol (CBD) and cannabinol (CBN) are the three main cannabinoids that are most present and described. CBD itself is not responsible for the psychotropic effects of cannabis, since it does not produce the typical behavioral effects associated with the consumption of this drug. CBD has recently gained growing attention in modern society and seems to be increasingly explored in dentistry. Several subjective findings suggest some therapeutic effects of CBD that are strongly supported by research evidence. However, there is a plethora of data regarding CBD's mechanism of action and therapeutic potential, which are in many cases contradictory. We will first provide an overview of the scientific evidence on the molecular mechanism of CBD's action. Furthermore, we will map the recent developments regarding the possible oral benefits of CBD. In summary, we will highlight CBD's promising biological features for its application in dentistry, despite exiting patents that suggest the current compositions for oral care as the main interest of the industry.

Research efficacy of gaseous ozone therapy as an adjuvant to periodontal treatment on oxidative stress mediators in patients with type 2 diabetes: a randomized clinical trial.

BACKGROUND: Chronic inflammation and cumulative oxidative stress have been theorized as two common pathways of the interconnection between periodontitis and diabetes. Improvement in oxidizing status has been demonstrated in periodontal patients with diabetes treated with proper non-surgical periodontal treatment. In addition to periodontal treatment, Gaseous ozone therapy has been reported to possess anti-inflammatory properties and the ability to stimulate the endogenous antioxidant defence mechanism. To date, the antioxidant effect of gaseous ozone, in addition with periodontal treatment in diabetic patients, has been examined in only one study. The aim of this study was to determine the efficacy of gaseous ozone therapy as an alternative approach to supporting non-surgical periodontal therapy (NSPT), aimed at improving antioxidant machinery and interfering with ROS production on plasma levels in diabetic individuals diagnosed with moderate or severe periodontitis. METHODS: One hundred and eighty patients with periodontitis and type 2 diabetes mellitus were randomly assigned to receive non-surgical periodontal treatment (NSPT) plus gaseous ozone therapy (A) NSPT alone (B). Clinical and periodontal parameters -Bleeding on probing (BOP), Periodontal pocket depth (PPD), and Clinical attachment Level (CAL)- and plasma levels of oxidant-antioxidant (TOS- TAOS) levels, glutathione (GSH), and malondialdehyde (MDA) were recorded at baseline and at 3- (T1) and at 6-months (T2) after treatment. RESULTS: Both treatments were efficacious in reducing clinical parameters. However, there were no significant differences regarding oxidative stress parameters in group A compared to group B. CONCLUSIONS: In the present study, gaseous ozone therapy did not enhance the effect of periodontal treatment in reducing oxidative stress in plasma levels of periodontitis patients with type II diabetes. TRIAL REGISTRATION: The study was registered with ISRCTN1728169 (23/07/2022).

Current Status of Peri-Implant Diseases: A Clinical Review for Evidence-Based Decision Making.

BACKGROUND: the prevalence of peri-implant diseases is constantly growing, particularly with the increasing use of dental implants. As such, achieving healthy peri-implant tissues has become a key challenge in implant dentistry since it considers the optimal success paradigm. This narrative review aims to highlight the current concepts regarding the disease and summarize the available evidence on treatment approaches clarifying their indications for usage following the World Workshop on the Classification of Periodontal and Peri-implant Diseases (2017). METHODS: we reviewed the recent literature and conducted a narrative synthesis of the available evidence on peri-implant diseases. RESULTS: scientific evidence on case definitions, epidemiology, risk factors, microbiological profile, prevention, and treatment approaches for peri-implant diseases were summarized and reported. CONCLUSIONS: although there are numerous protocols for managing peri-implant diseases, they are diverse and nonstandardized, with no consensus on the most effective, leading to treatment confusion.